Local Roller Shutter Parts Suppliers Melbourne

Roller Shutter Parts Melbourne

If your shutter is sticking, noisy, slow to move, or the remote has stopped responding, the fix usually comes down to the right part matched to your setup. As a family business with 30+ years in the trade, we help Melbourne homeowners and businesses identify what’s failed, supply the correct roller shutter parts, and get things working again, so give us a call to check for parts compatibility.

Local Roller Shutter Parts Suppliers Melbourne

Roller shutter parts vary from one setup to the next because the right motor, control, or guide depends on the shutter size, operation type, and how it’s used day to day. We keep a range of parts on hand, so you are not left trying to make a close enough replacement fit.

Parts We Stock:

Roller shutter Konnen tubular heavy duty motors
Roller shutter Revo tubular motors
Roller shutter Konnen 12v for solar operating
Remote Hand set controller up to 99 shutters with “00” muster for all up/down
Key ring hand set controller
Wall switch receivers single/double
Solar panels and batteries 12v
Wall switch receivers with timer programming Open/close automatic
External housing-Box
Roller Shutter entry guides
Replacement drive cable (8mm)

If you are unsure whether you need a part, a repair, or a motor conversion, we can talk it through and steer you to the most sensible option for your shutter and budget.

How to Order Roller Shutter Parts in Melbourne

You should not have to guess what you are buying, so we keep the process practical:

Step 1

Share the basics, whether it’s manual or electric, how it’s controlled (remote, wall switch, solar), and what the shutter is doing.

Step 2

Send a couple of photos if you can, especially of the control, motor side, and the problem area (guides, housing, curtain).

Step 3

We confirm the most likely replacement part and check compatibility before you spend money.

Step 4

Choose parts supply or technician help, either purchase the part for DIY installation, or book a registered technician to supply and fit.

Step 5

After-install support, if something still feels off we can advise on adjustments, servicing, or the next step.

DIY is fine for simple items, like remotes, receivers, or guides, but motor and wiring work is where mistakes get expensive. If the shutter is heavy, high-use, or you’re seeing electrical faults, a technician install is usually the safer, cleaner outcome.

Get Your Roller Shutter Parts

If you need roller shutter parts in Melbourne, we will help you identify the right component, avoid mismatched replacements, and get your shutter back to smooth, reliable operation. Call (03) 9364 2232 or send through your details and photos, and we’ll recommend the best path, parts supply, repair, or upgrade.

FAQs

Can I replace roller shutter parts myself?

While some minor adjustments, like replacing a remote, receiver, guide, or drive cable, might seem simple, for safety and proper operation, it’s generally best to call a professional technician. They’ll ensure the job is done correctly and safely.

How do I know if the problem is the motor or the controls?

If the shutter does nothing at all, it can be the power, receiver, remote, or motor, so it pays to rule out the simple items first. If it moves but is slow, noisy, or stops under load, that often points to motor strain or mechanical drag in the guides.

How much does it cost to replace a roller shutter motor?

It depends on the shutter size, access, and motor type, but many replacements land in the mid-hundreds once parts and labour are included. The quickest way to get an accurate number is to confirm the shutter type and motor requirement first.

Do you supply parts or can you install them as well?

Both. You can purchase parts for DIY, or book a registered technician to supply and fit the part, which is often the better call for motor, wiring, and high-use shutters. If you are not sure which way to go, tell us what the shutter is doing and how it is controlled, and we can recommend the safest, most cost-effective option before you commit.